電話:0573-82721177
傳真:0573-82720300
TN-1型粘結劑

DZGR-FZ-130
TN-1 Bonding Agent
TN-1型粘結劑

TN-1型粘結劑系特殊單組份、無溶劑型聚氨酯粘結劑,基本成份為聚醚、添加料、阻燃劑、助劑等。固化后,粘結劑不溶,防水性能極佳。

TN-1 bonding agent is a special mono-fomluate and non-sdlvent bonding agent whose base ingredients are polyether, addition materials, fire retardarts and auxiliary agents, etc. It has no irritable smells, toxic free and can be applied under normal temperature. The brush coating or spaying of this agent is convenient with a long-lasting effect. The brush coating or spraying of this agent is converient with a long-lasting effect. The bonding agent can solidify under normal temperature, after which it is not dssolvable in water, showing excellent waterproof performance.

使用方法Usage

  • 表面處理,應先清除粘結面上的油污或灰塵。
  • 涂膠:采用單面上膠法,用鋸齒式刮刀或噴涂設備將膠涂均勻地涂布在基面上。
  • 貼合:將要粘巾的材料,鋪放在涂膠的基面上,粘貼后可不加,若稍許加壓粘結效果更好。
  • 固化:在25℃,RH為100%(濕度),在4小時內即可達到粘結強度,以特殊加工后,冬天也能達到同樣效果,常溫下24小至48小時即可使用。
  • Surface treatment: the oil stains or dust on the bonding face shall be first removed.
  • Application: adopting single face application method. Use a toothed scrapper or spraying equipment to homogeneously apply it onto the base.
  • Bonding: put the material to be bonded onto the base with the bonding agent.
  • No pressure after bonding is allowed, but a little pressure will help can be reached after 4 hours at 25℃, RH 100% After special processing, the same effect can be reached even in winter. Under normal temperature, usage is allowed after 24 to 48 hours.

技術參數Technical Parameters

項目Item 數據Date
外觀Appearance 淺黃色或褐色粘稠液Light yellow or brown viscous fluid
密度Density 1100~1200 kg/m3
粘結強度Bonding strength 剪壓強度:≥2Mpa Compressive and shear strength:=2Mpa
粘度Viscosity 3000~20000厘泊 3,000-20,000CPS
適用溫度Applicable temperature -196°C~+250°C
耐堿度Acid-alkali degree PH值為6-8PH Value is 6-8
山东十一选五开奖走势 双色球出号分析图 海南飞鱼彩票推荐 新疆11选5和值走势图 河南快赢481最大遗漏 爱玩游戏中心官网 深圳福彩中心 创业板股票涨跌幅度 南国彩票七星彩走势图 苹果手机用什么捕鱼软件赚钱最好用 河南十一选五走势图11 集客维护赚钱 青鹏棋牌手游官网 双色球历史一等奖号码查询 小黄鱼烧烤赚钱不 广东十一选五 280组选关系